Before Riding - Hover-1 ALPHA PRO Operation Manual

Before each use, the E-Scooter operator shall perform the
pre-operation checks as specified below:
• The area that the unit is to be operated in is safe and suitable for
safe operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
• Any and all axle guards, chain guards, or other covers and guards
supplied by the manufacturer are in place and in serviceable
condition.
• The tires are in good condition, inflated properly, and have sufficient
tread remaining.
It is important that you fully understand all elements of your Alpha Pro
E-Scooter. If these elements are not used correctly, you will not have
full control of your Alpha Pro. Before you ride, learn the functions of
the various mechanisms on your Alpha Pro.
Practice using these elements of your Alpha Pro at slower speeds in a
flat, open area before taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your Alpha Pro is in proper working order each time you
ride. If a part of the Alpha Pro does not function correctly, please
contact our Customer Support Center.
• Ensure the battery is fully charged before riding your E-Scooter.
• Please wear all appropriate safety and protective gear before
operating your E-Scooter.
• Make sure to wear comfortable clothes and flat, closed-toe shoes
when operating your E-Scooter.

BEFORE RIDING

WARNING
Any E-Scooter that does not work
properly can cause you to lose control
and fall. Do not ride an E-Scooter with a
part that is damaged. Replace the
damaged part before riding.
21