Hover-1 E-TRACK Operation Manual page 16

RIDING YOUR E-TRACK
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN LEAD TO DAMAGE TO YOUR E-TRACK, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE,
AND CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
OPERATING YOUR DEVICE
Make sure the E-Track is fully charged before your first use. For
charging instructions, please refer to "CHARGING YOUR E-TRACK" on
page 16.
Make sure the tires are inflated to 65 psi.
Unfold the foot rests from the sides of the E-Track.
When you are ready to ride, turn on the E-Track using the power
switch.
To start riding, engage the throttle gently. Start slow, and gradually
speed up as you get more comfortable riding.
To slow down, release the throttle and squeeze the brake handle.
The brake is pressure-sensitive, so a tighter grip provides more
stopping power. The faster you are driving, the longer stopping
distance you will need to come to a complete stop. Be cautious,
stopping too fast from a high speed can cause your dirt bike to skid
out of control.
Prepare to brace yourself if you encounter bumps or uneven
surfaces. Slow down and ride cautiously. Get off and move your
E-Track to a safe operating space if needed.
When you are ready to stop riding, bring your E-Track to a full stop
and flip the power switch to off.
14