fantastic furniture Cove Coffee Table 2 Drawer Manual page 6

Step 3
You will need
6 x Small 2 x CR Runner
Screws (H5) Tracks (H7)
Phillips Head
Screwdriver
Attach 2 x CR Runner Tracks (H7) to Divider (P4) with 6 x Small Screws (H5) by tightening
with the Phillips Head Screwdriver.
Step 4
You will need
6 x Dowels 6 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 6 x Cam Nuts (H4) into Side Panels (P3 x 2) and Divider (P4) as shown.
Rotate the cam nuts so the arrow points towards the incoming cam bolts.
Attach Side Panels (P3 x 2) and Divider (P4) to Top Panel (P1) by tightening
with the Phillips Head Screwdriver.
fantasticfurniture.com.au
H5
CR
H7
(P4)
(P3)
FLIP
(P4)
(P4)
(P1)
(P3)
Page 6