fantastic furniture Cove Coffee Table 2 Drawer Manual page 11

Step 13
You will need
8 x Cam Nuts Phillips Head
(H4) Screwdriver
Insert 4 x Cam Nuts (H4) into Left & Right Drawer Side (P8 & P9) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Drawer
Front (P7) to Left & Right Drawer Side (P8 & P9). Make sure that the groove lines up
the whole way around the drawer. Tighten with a Phillips Head Screwdriver.
Step 14
You will need
2 x DL 2 x DR
Runners (H8) Runners (H9)
8 x Small Phillips Head
Screws (H5) Screwdriver
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P8) and 1 x DR Runner (H9)
to the bottom of Right Drawer Side (P9) with 4 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au
(P7)
(P9)
(P8)
(P9)
x2
(P8)
x2
Page 11