14. To reduce the risk of injury, never overload the drawers. Refer to loading instructions. 15. To reduce the risk of electric shock or fire, never overload receptacles. Refer to markings for the proper load on receptacles. CONNECT WITH US! PINNACLE.NET.AU...
Lock Drawer C/D/E Liner Lock Connection Drawrer F/G/H Trim Lock Bar Drawer F/H Trim Trim End Cap Drawer G Trim Pinnacle Badge Power Cord Long Vertical Trim Drawer A Short Vertical Trim Drawer B Front Outlet Drawer C Drawer Power Strip...
Page 4
ASSEMBLY INSTRUCTIONS: 1. Bolt handles to each end of the housing using the two M8 handle bolts for each handle. 2. Connect the included power cord to the two receptacles on the back of the trolley. Connect the longer branch to the top receptacle, and the shorter branch to the bottom receptacle. OPERATION INSTRUCTIONS: 1.
RECONFIGURING DRAWERS: 1. Drawers of the same height and width can be 3. After removing the drawers, check where the rearranged. slides are positioned on them. All sliders on each drawer must be fully supported by drawer sliders. WARNING! To prevent serious injury or death 4.
The warranty covers domestic use only and does not apply to commercial applications. This warranty is given by Pinnacle Hardware, ABN 87 614 496 196, 45-49 Whitfield Boulevard, Cranbourne West VIC 3977, 1800 349 776, Email: support@pinnacle.net.au.