Table of Contents
Advertisement
How to put off the shelves
1. Take out all items from the shelves.
2. Please keep the door open fully all the way before pulling the shelves out.
3. Pull the shelf forwards (Fig.1) until the groove on either side of the shelf is level with the plastic peg on
either side of the cabinet. (Fig.2). Uptilt the shelf from both sides (Fig.3), and then firmly pull out the shelf.
(Fig.4).
Reversing the Door Swing
This appliance has the ability to have the door open from the left or right side. The unit is delivered to you with
the door opening from the left side. Should you desire to reverse the opening direction, please follow the
instructions below. To make the reversal, you will find two hardware pieces in a plastic bag inside the appliance:
the top left hinge and the bottom left hinge. The bottom support bracket is used for both sides.
1.
Carefully lay the appliance on its back.
Use cushioning to protect the floor and
the appliance.
2.
Using a Philips screwdriver, remove the
two screws and bottom right hinge
beneath the door. Keep the hinge in a
safe place in case you need to reverse
the door again in the future. (Fig.1)
3.
Carefully slide the door off and place it
on a padded surface.
4.
Interchange the plastic shaft sleeves at
6
Advertisement
Table of Contents
