Page 1
About the Wood and Finish This product has been carefully crafted of: MDF, solid pine wood and/or pine veneers. These materials derive from plantations, a renewable and well managed forest, therefore, not endangering the environment. The highest quality standards have been implemented to assure a sturdy and reliable product.
Page 3
38135 / 38140 - T / T BUNK BED TO OBTAIN PARTS, PLEASE CONTACT: ACME FURNITURE INC - CITY OF INDUSTRY, CA 1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton.
Part list: 38135 / 38140 - T / T Bunk Bed WARNING LABEL DO NOT REMOVE! CERTIFICATION LABEL DO NOT REMOVE! OPTIONAL TENTS 36,6in x 28,5in 29,5in x 28,5in 36,6in x 33,5in 29,5in x 33,5in 29,5in x 33,5in Ø17 1/4 x 110 Screw (Black) Ø17...
LEFT SIDE ATTENTION: HOLE TOP RUSTIC OUTSIDE 7,0 x 100 Screw (Black) Hex Screwdriver RIGHT SIDE HOLE TOP ATTENTION: RUSTIC OUTSIDE Warning Certification B+M B+M 7,0 x 100 Screw (Black) Hex Screwdriver...
Page 7
THIS HOLE ON TOP ATTENTION: RUSTIC OUTSIDE INSERT AND INSERT AND ATTACH SCREWS (C&D), ATTACH SCREWS (C&D), BUT DO NOT TIGHTEN UNTIL BUT DO NOT TIGHTEN UNTIL STEP #06 STEP #06 Hex Screwdriver HALF MOON 1/4 x 110 Screw (Black) INSERT AND INSERT AND ATTACH SCREWS ’’B’’,...
Page 8
ATTENTION: HOLE UP ATTENTION: RUSTIC OUTSIDE AFTER ATTACHED AFTER ATTACHED SCREWS ’’B’’ SCREWS ’’B’’ AT THIS TIME, AT THIS TIME, Hex Screwdriver PLEASE TIGHTEN PLEASE TIGHTEN ALL SCREWS! ALL SCREWS! 7,0 x 100 Screw (Black) ATTENTION: COUNTERSINK ON TOP Hex Screwdriver 7,0 x 70 Screw (Black)
Page 9
FRONT ATTENTION: PLEASE USE A SAFETY STEP LADDER TO ASSEMBLY THE ROOF. 7,0 x 50 Screw (Black) 4,0 x 30 Screw (Black) Hex Screwdriver ATTENTION: PLEASE USE A SAFETY STEP LADDER TO ASSEMBLY THE ROOF. 7,0 x 50 Screw (Black) Hex Screwdriver...
Page 10
(X2) 8 x 25 Wood Dowel 4,0 x 30 Screw (Black) ROOF ATTENTION: PLEASE USE A SAFETY STEP LADDER TO ASSEMBLY THE ROOF. 4,0 x 30 Screw (Black)
Page 11
H (x4) (x4) INSIDE L x2 ATTENTION: PLEASE USE A SAFETY STEP LADDER TO ASSEMBLY THE ROOF. 4,0 x 30 Screw (Black) Bracket 3,5 x 16 Screw...
Page 12
ATTENTION: PLEASE USE A SAFETY STEP LADDER TO ASSEMBLY THE ROOF. 8 x 25 Wood Dowel 4,0 x 40 Screw (Black)
4,0 x 30 Screw (Black) SLATS 4,0 x 30 Screw (Black) The first slats must be fixed at 3” from each headboard end. ``INSTALL SLAT KIT WITH SPACER TAPE ON TOP(FACING UP)`` IMPORTANT NOTE: Please note warpage may occur because it is natural wood. To facilitate the placement of the screws, you must press the two siderails simultaneously, as shown by the arrows.
Page 17
OPTION THE BUNK BED ONLY OPTION THE BUNK BED WITH TENT FABRIC...
Need help?
Do you have a question about the 38135 and is the answer not in the manual?
Questions and answers