Blade X PRO Quick Start Manual

A. Connect the drone with the controller:

1. Please fully charge the battery before start

2. Press the power on / off button on the drone to turn the power on

3. Press the power on / off button on the controller to turn the power on. Red light on the right will

keep flashing, the drone is on a paring mode

4. Push the left hand joystick up , then push it down

5. You will hear a "beep" sound twice, it means controller paring is completed and the red light

becomes solid

6. Now your drone is connected with the controller

Table of Contents

Need help?

Do you have a question about the X PRO and is the answer not in the manual?

Page 1 Blade X PRO Quick Start Manual A. Connect the drone with the controller: 1. Please fully charge the battery before start 2. Press the power on / off button on the drone to turn the power on 3. Press the power on / off button on the controller to turn the power on. Red light on the right will keep flashing, the drone is on a paring mode 4.
Page 2 B. Connect the drone with your phone for pictures and videos: 1. Please turn OFF the drone and the controller if you paired the drone with the controller earlier. 2. Turn on the drone again 3. download the app from App Store or Google Play and install it 4.
Page 3 7. The following is the layout of the function keys on your screen and now you are ready to go!
Page 4 C. Using the controller to operate the drone while your phone is connected with the drone app for videos and picture 1. Repeat option A, connect your drone with controller 2. Once the connection is set up with your controller, turn on the wifi from your phone and select “WIFI_FPV_XXX”...