EK-Quantum Vector2 Trio RTX 4090 D-RGB ABP Set User Manual page 12

M2.5 x 4 AX1 SCREW
I/O BRACKET SCREW
I/O BRACKET
I/O BRACKET SCREW
STEP 2
Use seven (7) M2.5 x 4 AX1 Screws and PVC washers to tighten
the PCB on the water block. Tighten the screws evenly using the
Phillips-head screwdriver. EK recommends you start tightening the
screws around the GPU core first, and then continuing outward to
M2.5 PVC WASHER
prevent damage to the GPU.
After securing the GPU PCB, reuse the I/o Bracket and tighten it
with the I/O Factory screw.
For this step, you will need:
Screws must be present in the places marked on the picture.
STEP 2
- 12 -
M2.5 x 4 AX1 Polyamide Washer
Screw (7 pcs) (7 pcs)
I/O Bracket Screw
I/O Bracket
(1pc)
Phillips Head
Screwdriver