Dictator DICTAMAT 50 BK-Z Technical Manual page 9

1) Requirements

2) Fixing of the Second

Door Leaf

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail info@dictator.de • 20200708

D) Installation of the DICTAMAT 50 BK-Z on Double-

Leaf Doors

With a DICTAMAT 50 BK-Z you can also move double-leaf doors.

Requirements:

- Simultaneous opening/closing of both door leafs (central closing!)

- Both leafs have the same dimensions.

- The force according to point E1 is sufficient for the double-leaf door.

For double-leaf doors you need just one additional component: the door

actuator for the second door leaf, part no. 701012 (zinc-plated).

Ill. 12

Function: The door actuator for the second door leaf is fixed to the

other part (upper or lower, ill.12) of the belt so that the second door leaf

is moved automatically by the revolving belt.

Installation:

Fix the door actuator for the second door leaf (Ill. 13) approximately

in centre of the second door leaf. The position has to be choosen so

that the clamping plate is at the height of the revolving belt it has to be

attached to.

Unscrew the clamping plate

plced between the two screws. Now put back the clamping plate and

tighten it.

IMPORTANT: The door actuator for the second door leaf has to be the

last to be mounted, when the belt is already tensioned.

DICTAMAT 50 BK-Z

OPEN

Door actuator for the

second door leaf



and position the toothed belt so that it is



Technical Manual

Default door

actuator with

belt fixing

Ill. 13

Page 02.060.09

Table of Contents