Bosch LR 7CBS2 Series User Manual And Assembly Instructions page 21

Note: The metal cover has sharp edges. Protect the
6.
filter cover against scratches.
Appliance variant A:
2
2
Appliance variant B:
7.
Fit the grease filters.
8.
To avoid causing damage, do not bend the grease
filters.
Swing the filter cover up and ensure that it engages.
9.
Removing the appliance
WARNING ‒ Risk of injury!
¡ The appliance is heavy.
To move the appliance, two people are required.
▶
Use only suitable tools and equipment.
▶
All manuals and user guides at all-guides.com
¡ Components inside the appliance may have sharp
¡ Risk of injury when opening and closing the hinges.
1.
2.
3.
4.
5.
6.
7.
edges.
Wear protective gloves.
▶
Keep your hands away from the hinges.
▶
Disconnect the appliance from the power supply.
Swing down the filter cover.
Open the filter cover fully and without pulling on it.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
Press together the cable duct at the sides and re-
move it.
Disconnect the cable at the appropriate point.
Undo the screws on the hinges up to approx. 7 mm.
5
Do not loosen them fully.
Unhook and remove the filter cover.
Installation instructions en
21