OSP Home Furnishings ALIOS ALS27 Assembly Instructions

Bookcase

July, 2019

ALS27

ALIOS BOOKCASE

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.officestar.net or call or write us.

Table of Contents

Do you have a question about the ALIOS ALS27 and is the answer not in the manual?

Page 1 July, 2019 ALS27 ALIOS BOOKCASE Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
Page 2 LIMITED WARRANTY OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase.
Page 3 PARTS (A) Right Frame (1 PC) (B) Left Frame (1 PC) (C) Top Shelf (1 PC) (D) Shelf (3 PCS) HARDWARE LIST DRAWING DESCRIPTION QUANTITY Small Screw 1 PC Bolt 32 PCS Long Screw 1 PC Wall Anchor 1 PC Leveler 4 PCS Bracket...
Page 4 STEP 1 DO NOT FULLY TIGHTEN BOLTS (2). STEP 2 APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN ALL SCREWS & BOLTS. IF NEEDED, ADJUST LEVELERS (5) TO LEVEL BOOKCASE.
Page 5 ANTI-TIP KIT INSTALLATION STEPS: Place bookcase in desired location. Carefully drill a ¼’’ pilot hole into wall, gently tap Wall Anchor (4) into pilot hole. Secure Strap (7) to wall using one Long Screw (3), FULLY TIGHTEN LONG SCREW (3) USING PHILLIPS SCREWDRIVER (not provided).