Table of Contents
Advertisement
2.0
Applicable standards and reference documentation
The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives
depend on host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and
governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and
temperature regulation. In particular, the drive must be securely mounted to guarantee the specified performance characteristics. Mounting by
bottom holes must meet the requirements of Section 9.3.
2.1
Standards
The Enterprise Performance - 3.5 HDD family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate
SAS Interface Manual, part number 100293071.
The drives are recognized in accordance with UL/cUL 60950-1 EN60950-1 and IEC 60950-1. Product also fulfills the requirements of UL/IEC 62368-1.
The following regulatory model number represent all features and configurations within the series:
Regulatory Model Number: STR00F
The security features of Self-Encrypting Drive models are based on the "TCG Storage Architecture Core Specification" and the "TCG Storage
Workgroup Security Subsystem Class: Enterprise_A" specification with additional vendor-unique features as noted in this product manual.
2.1.1
Electromagnetic compatibility
The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is supplied as a
subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the Radio Interference Regulations of the Canadian
Department of Communications.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding. The drive is
capable of meeting the Class B limits of the FCC Rules and Regulations of the Canadian Department of Communications when properly packaged;
however, it is the user's responsibility to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be
required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be used, with
the shields grounded to the enclosure and to the host controller.
2.1.1.1
Electromagnetic susceptibility
Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and RCM Marking. The drive was
tested in a representative system for typical applications and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/
EMS) for Class B products. The selected system represents the most popular characteristics for test platforms. Although the test system with this
Seagate model complies with the directives/standards, we cannot guarantee that all systems will comply. The computer manufacturer or system
integrator shall confirm EMC compliance and provide the appropriate marking for their product.
Electromagnetic compliance for the European Union
If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic Compatibility Directive 2004/108/EC as
put into place on 20 July 2007.
Australian RCM
If this model has the RCM Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the Electromagnetic
Compatibility (EMC) Framework requirements of the Australian Communications and Media Authority (ACMA).
Canada ICES-003
If this model has the ICES-003 Marking it complies with the Canadian Standard Association Standard CAN/CSA-CISPR 22- 10, Information
Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement.
Korean KCC
If these drives have the Korean Communications Commission (KCC) logo, they comply with KN22, KN 24, and KN61000.
Taiwanese BSMI
If this model has the Taiwanese certification mark then it complies with Chinese National Standard, CNS13438..
Seagate Enterprise Performance - 3.5 HDD SAS Product Manual, Rev. B
7
Advertisement
Table of Contents
