Miscellaneous Operating Features And Conditions; Sas Physical Interface - Seagate ST4000NM0011 Product Manual

10.4

Miscellaneous operating features and conditions

Table 8 lists various features and conditions. A "Y" in the support column indicates the feature or condition is supported. An "N" in the support
column indicates the feature or condition is not supported.
Table 8 Miscellaneous features
Supported Feature or condition
N Automatic contingent allegiance
N Asynchronous event notification
N Synchronized (locked) spindle operation
Y Segmented caching
N Zero latency read
Y Queue tagging (up to 128 queue tags supported)
Y Deferred error handling
Y Parameter rounding (controlled by Round bit in Mode Select page 0)
Y Reporting actual retry count in Extended Sense bytes 15, 16, and 17
N Adaptive caching
Y SMP = 1 in Mode Select command needed to save RPL and rotational offset bytes
Table 9 Miscellaneous status
Supported Status
Y Good
Y Check condition
Y Condition met/good
Y Busy
Y Reservation conflict
Y Task set full
N ACA active
N ACA active, faulted initiator

10.4.1 SAS physical interface

Figure 7 shows the location of the SAS device connector J1. Figures 8 and 9 provide the dimensions of the SAS connector.
Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate's SAS drives are
provided in the SAS Interface Manual.
Figure 7. Physical interface
Seagate Enterprise Performance - 3.5 HDD SAS Product Manual, Rev. B 47