Operation & Settings; Power Supply; Switching The Instrument On/Off; Display (Tdr Trace) - Gossen MetraWatt METRACABLE TDR PRO Operating Instructions Manual

METRACABLE TDR PRO
4 Operation & Settings
This section describes operation of the instrument and the settings which can be selected
for the instrument, as well as for measurements performed with the instrument.
Power Supply 
•
Switching the Instrument On/Off 
•
Display (TDR trace) 
•
Instrument Menus 
•
Selecting Instrument Settings 
•
Changing Measurement Settings 
•
4.1

Power Supply

The instrument is battery-operated. Charged batteries are shipped loose, which you installed
during initial startup 
If the batteries are depleted and have to be replaced "Battery Replacement"
4.2

Switching the Instrument On/Off

Press the ON/OFF key in order to switch the instrument on and off. The TDR trace is displayed
immediately after pressing the ON/OFF key.
4.3

Display (TDR trace)

The TDR trace appears in the display as a default function.
The cursor can be moved to the right or the left with the help of the scroll keys. Pressing and
holding the scroll key causes the cursor to move more quickly.
By pressing the SEL key, a function is selected which can then be controlled with the help of
the two scroll keys, namely Cursor, Length, Y-Zoom or X-Zoom. For example if length is
selected, length can be reduced or increased with the help of the scroll keys.
0m
Note!
Detailed information concerning the use of the TDR trace display "Measurements"

12
8

8


8

9

10


condensed operating instructions (included with the instrument).
C1:38,7m 0.67
Cursor 150 ~ 75m
8
11
Absolute Cursor Position
Cursor
VF Display
Battery Display
Display Range Lower Limit
Function Selected via the 
and  Scroll Keys
Display Range Upper Limit
Input Display, AC (~) or DC (–)
Impedance Display
Gossen Metrawatt GmbH

30.