Care And Maintenance - DCS CAD1 Series Installation Manual/User Manual

All parts of the Professional Grill Cart can be cleaned with hot soapy water, rinsed, dried
and buffed to a shine with a soft, heavy cloth. Always try this first, as it is the mildest
cleaning procedure.
1 Use the mildest cleaning procedure first. Some brands of cleaners of the same type are
harsher than others, read their directions. A scent or a propellant can make a difference
in the product, read the ingredients. Try on a small area first.
Caution should be taken to keep the gas regulator free from any cleaning soaps or water.
2 To avoid marring the surface, always rub metal finishes in the direction of the stainless
steel polish lines (grain). The cleaner will be more effective when used in the direction of
the polish lines.
3 Use only clean sponges, soft cloths, paper towels, plastic non-metal soap pads for
cleaning or scouring as recommended in this section. (Use only soap pads with soap still
in them. An empty pad can scratch.)
4 Be sure to rinse all parts thoroughly and to wipe dry to avoid water marks.
5 After cleaning, use a stainless steel polish, such as Stainless Steel Magic® applied to the
drawer and handle surfaces.
Brand name cleaners
In this section on cleaning, the use of name brands is intended only to indicate a type of
cleaner. This does not constitute an endorsement. The omission of any name brand cleaner
does not imply its adequacy or inadequacy. Many products are regional in distribution and
can be found in local markets and department stores.

CARE AND MAINTENANCE

21