Cart Assembly Instructions - DCS CAD1 Series Installation Manual/User Manual

Cart assembly instructions

Linking carts together (optional)
To link two or more CAD1 carts, the following instructions must be done first, using the
hardware provided, before installing the top modules.
IMPORTANT!
Once the carts are linked, they cannot be moved. Moving the carts once linked could
damage the carts.
1 Hand tighten two bolts, four washers, and two nuts on the front and back sides of the
carts as shown.
2 Carefully wrench tighten fasteners once carts are aligned with each other.
INSTALLATION
Front side
Head of bolt
with washer
Back side
End of bolt
with nut
and washer
11