Using The Cart; Removing The Drawers; Re-Installing The Drawers - DCS CAD1 Series Installation Manual/User Manual

Removing the drawers

IMPORTANT!
To prevent personal injury or damage to the drawers, do not overload them. The
maximum rating of each drawer is 15kg.
To remove the drawers, pull them out until their slider latch is visible. Carefully push the
latch down on the left side while pulling up on the latch on the right side and pull the
drawer completely out of the frame.
To prevent damage to surfaces, place the drawers on a stable surface on a protective towel
or tablecloth while removed from the cart.

Re-installing the drawers

1
2

USING THE CART

Re-install the drawers by extending
their guides.
While holding the drawer parallel to the
cabinet, carefully align & engage the ends of
the glides. Slide the drawer about 25mm so
that the glides are supporting the back of
the drawer.
19