Battery Installation; Turning On; Illuminating The Display - Cobra microTALK FRS 225 Operating Instructions Manual

Operation
Battery Install Batteries
Installation
Note
Batteries are not included
with microTALK® 2-way
radio. Always use 3 high
quality AA alkaline batteries
or optional battery pack
(sold separately).
Only the Cobra® NiMH
battery (Part #FA-AA)
pack can be recharged.
Note
When batteries are low the
indicator willblink.
Pull lock tab down
1
to remove battery
cover.
Note
Visit Cobra® Electronics
(www.cobra.com) for
information about optional
battery pack and desktop
charger accessories.
2
+ - +
- + -
Insert three "AA"
2
batteries. Position
batteries according
to polarity markings.
Turning On Your microTALK®
TURN
SWITCH
BATT LOW
Turn the On/Off/Volume switch. An audible
1
"tone" will indicate the unit is on.
call

Illuminating the Display

Push and release LIGHT/MAX RANGE
1
button to illuminate display for ten seconds.
Operation
Turning
On Your
microTALK
®
Note
Whenever the unit is on
you can receive
communications.
Illuminating
the Display
3