Delete All Trails; Update Trail Option - Lowrance M52 S/GPS Installation And Operation Instructions Manual

Main Menu, left, Trails Menu, center, Trail Options, right.

Delete All Trails

To remove all of the trails from memory: from the Trails Menu, press →
to |
D A ENT
ELETE LL

Update Trail Option

This menu lets you change the way the trail updates occur.
WARNING:
If you uncheck the Update Trail option, automatic trail
creation and recording will be turned off. You must turn
it back on to record trails. The default setting is on.
From the Trails Menu, press → to
highlighted, press
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
Press ↑ or ↓ to select criteria type|
date Rate data entry box appears on the menu. If you selected Distance,
the Update Distance data entry box appears on the menu.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 miles.
|← to |
Y ENT
ES
to check it (turn on) and uncheck it (turn off).
ENT
.
|
O ENT
PTIONS
|
O ENT
PTIONS
. If you selected Time, the Up-
ENT
124
. With
U A
PDATE
|↓ to
U
PDATE
T
CTIVE RAIL
C .
RITERIA