Lowrance M52 S/GPS Installation And Operation Instructions Manual page 9

Fish-finding sonar & gps plotter
Table of Contents

Advertisement

Back-up memory: .......... Built-in memory stores GPS data for dec-
Languages:...................... 10; menu languages selectable by user.
Frequency:...................... 200 kHz.
Transducer:...................... A Skimmer
Transmitter: ................... 800 watts peak-to-peak; 100 watts RMS.
Sonar sounding
depth capability: ........... 600 feet (180 meters). Actual capability de-
Depth display:................ Continuous display.
Audible alarms: ............. Deep/shallow/fish/zone.
Automatic ranging:....... Yes, with instant screen updates.
Auto bottom track:........ Yes
Zoom bottom track: ...... Yes.
Split-screen zoom:......... Yes.
Surface water temp: ..... Yes, built into transducer.
Receiver/antenna: ......... Internal 12 parallel channel GPS/WAAS.
Position updates: .......... Every second.
Position points: ............. 1,000 waypoints; 1,000 event marker icons.
Man Overboard:............. MOB feature precisely marks man overboard
Audible alarms: ............. Arrival/off-course/destination passed/anchor.
Graphic symbols for
waypoints or event
marker icons: ................. 42.
Routes:............................. 100; up to 100 waypoints per route.
ades. User settings are stored when unit is
turned off.
Sonar
transducer comes packed with
your sonar unit. Its 20° cone angle offers a
wide fish detection area of up to 60º with
high sensitivity settings. Operates at boat
speeds up to 70 mph (61 kts).
pends on transducer configuration and in-
stallation, bottom composition and water con-
ditions. All sonar units typically read deeper
in fresh water than in salt water.
GPS
location with special icon, then automatically
displays navigation data to that position.
3

Advertisement

Table of Contents
loading

Table of Contents