Map Auto Zoom; Scouting - Lowrance iFINDER Expedition C Operation Instructions Manual

Simulating Trail or Route Navigation
In Simulator mode, your unit can automatically follow a trail or route
without manual steering if you use these steps:
1. From the Map Page, go to the simulator menu. Pick a
at or near the beginning of your trail/route.
SITION
Enter an approximate
you toward the start of the trail/route.
2. Set to zero. Select
S
PEED
which turns on the simulator and returns you to the Map Page.
3. Begin navigating along the trail/route. (If you are close enough to the
first waypoint, the arrival alarm will usually go off as soon as naviga-
tion begins. Press
press ↑ (since you're using the Simulator's
to increase speed to the desired setting.
4. Press to turn off the steering and speed boxes. The unit will now
EXIT
automatically steer along the trail or route. When you arrive at your
destination, cancel navigation.

Map Auto Zoom

This receiver has an auto zoom feature that eliminates much of the but-
ton pushing common with other brands of GPS receivers. It works in
conjunction with the navigation features.
Start navigation to a waypoint. (See the waypoint section for more in-
formation on navigating to a waypoint.) Then, with auto zoom on, the
unit will zoom out until the entire course shows, from the present posi-
tion to the destination waypoint. As you travel toward the destination,
the unit automatically zooms in — one zoom range at a time — always
keeping the destination on the screen.
From the
M
AP
Auto Zoom. Repeat these steps to turn it off.

Scouting

The scouting feature gives users the capability to map out hunting ar-
eas, real estate and other land where property borders are not available
in mapping data A scout plot is a type of recordable GPS data that in-
cludes a perimeter or boundary marked by waypoints. Scout plots are
saved as part of a GPS Data File (with the *.usr suffix).
T
RACK
to clear the alarm.) When navigation starts,
EXIT
, press
P MENU
AGE
(shown in compass degrees) that will point
S A
TEER WITH RROWS
|↓ to
A
UTO
81
command and press
S A
TEER WITH RROWS
| to turn on (check)
Z ENT
OOM
S P
TARTING O-
,
ENT
command)