Navigate; Navigate Back Home; Navigate Back To Man Overboard Waypoint - Lowrance iFINDER Expedition C Operation Instructions Manual

The Transfer My Data menu asks if you want to save data to the MMC
or load data from the MMC into the iFINDER's memory.
2. If no MMC is present, you must insert a card into the iFINDER to
activate the
L
OAD
To load data from the MMC to the iFINDER, press → to
3. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
highlight the file, then press
| . To return to the main page display, press
L ENT
OAD
2. Saving: To accept the default name Data for the GPS Data File,
press ↓ to
S
AVE
below), press
ENT
Press ↑ ↓ to change the first character, then press → to the next char-
acter and repeat until the name is correct. Then press
| .
S ENT
AVE
The unit will display a completion message when the data transfer is
finished. To return to the main page display, press

Navigate

Navigation is one of the primary reasons GPS users choose the
iFINDER. The unit provides trip information about where you want to
go, how to get there and how long it will be before you arrive.

Navigate Back Home

You can navigate to the Home waypoint created in Easy Mode, but you
must use Advanced Mode's procedure for navigating to a waypoint. See
the entry later in this section on Navigate to a Waypoint.

Navigate Back to Man Overboard Waypoint

This unit has a man overboard feature that shows navigation data to
the location where the feature was activated. To activate it, press the
and
ZOUT ZIN
keys are pressed is used as the man overboard position. The unit auto-
or commands.
S
AVE
ENT
| . If you wish to rename the file (as in the example
ENT
to activate the selection box.
keys at the same time. Your position at the time these
to activate the selection box, use ↓ ↑ to
to accept the selection. Next, press ↓ to
ENT
51
|
L ENT
OAD
repeatedly.
EXIT
ENT
repeatedly.
EXIT
.
|↓ to