Lcd Messages; Hour & Home-Away Functions - Lorex WA-410 Instruction Manual

Wireless home security system
Hide thumbs Also See for WA-410:
Table of Contents

Advertisement

is answered, it will playback the message 2 times
Medical help - It will automatically dial Preset 6 → Preset 1 → Preset 2 → Preset3,
phone numbers for 3 cycles (6, 1, 2, 3). When the telephone
is answered, it will playback the message 2 times
LCD "MSG" : Message indicating on LCD
This system will leave a warning message on the LCD panel when the sensors are
opened, triggered or in a low battery condition. It also emits 3 short 'Beeps' every 10
Sec. to remind you of this. The first 5 messages can be displayed on the LCD. If you
want to check or delete the MSG, the system will need to be in the disarm mode. The
LCD display is shown below.
Press the ENTER button to read the message. Press the ENTER button again to read
the next message...etc.
Press the CANCEL button to delete all 'MSG's'. The LCD display is shown below.
24 Hour & Home-Away Functions
24 Hour Mode
The Lorex® security system can work for you 24 hours a day,7 days a week. The system
features a 24 hour status capability which is important for use with some accessory
sensors. The sensors that belong to the 24 hour mode include the Smoke Detector,
Gas Detector and Remote Control Handset (PANIC button)
A-AWAY and H-HOME modes:
When the system is armed in the HOME mode, the Main Console will exclude all PIR
Detectors, so the user can move freely within the house without triggering the PIR
Motion Detector.
When the system is armed in the AWAY mode, all sensors programmed are active and
are ready to trigger the alarm
00 HOME SECURITY
Disarmed MSG
63 DOOR SENSOR
01
Open
MESSAGE DELETED
15

Advertisement

Table of Contents
loading

Table of Contents