G-Lab Midi 2 x Loop User Manual page 5

Dear Customer,
Congratulations for choosing our G LAB product!
MIDI 2 x LOOP (M2L) is a loops' switcher controlled by MIDI interface or
manually, by using the buttons. M2L should be controlled by programmable
MIDI controller (which enables to program and send chosen MIDI PROG
CHANGE or CTRL CHANGE commands for any controller's preset). It is
particularly recommended to use the M2L as an extension of the G LAB GSC
guitar system controllers. Due to its passive signal path it is also possible to
use the M2L as an A/B/Y switcher.
Basic characteristics:
- two bypassed (by electro mechanic relay) loops to connect the pedal
effects or serially connected sets of effects,
- muting circuit based on opto elements,
- MIDI THRU connector to connect other MIDI devices,
- power supply and active loop indicators,
- possibility to control two M2L units by one Program Change command,
- two buttons for loops' manual on/off switching,
- power supply 9V DC (direct current).
3