Product Safety Symbols; Tru-Balance® 4 Power Positioning System; Precautionary Guidelines - Quantum TRU-BALANCE 4 Basic Operation Instructions

Power positioning system
Table of Contents

Advertisement

4
BASIC OPERATION INSTRUCTIONS

Product Safety Symbols

The symbols below are used on the power chair to identify
warnings, mandatory actions, and prohibited actions. It is very
important for you to read and understand them completely.
Read and follow the instructions in the
owner's manual.
Avoid exposure to rain, snow, ice, salt, or
standing water whenever possible. Maintain
and store in a clean and dry condition.
EMI/RFI–This product has been tested and
passed at an immunity level of 20V/m.
Maximum seating weight
Pinch/Crush points exist.
Do not expose to heat sources such as
open flame or sparks.
No smoking
Cover only—Maximum washing temperature
60°C (140°F)
Do not tumble dry.
Do not iron.
Do not bleach.
Operate your power chair on an inclined
surface only when legrest is fully retracted.
Consult
your
Quantum
Rehab
Provider
before
making any changes to your
seating system configuration.
The TRU-Balance® 4 Power Positioning System
The TRU-Balance 4 Power Positioning System is a unique
seating system designed specifically for the Quantum Power
Chair. It is fully adjustable to meet the individual needs of the
user, and it is mounted to a Quantum power base to provide
maximum maneuverability.
Reusable hook and loop fasteners are included in your owner's
package for use in attaching the seat cushion to the seat
base. These fasteners are not intended for use on cushions
with anti-skid material, as they may damage the seat cushion.
Figure 1 provides information on the TRU-Balance 4 Power
Positioning System components shown with a TRU-Comfort
back. The components of the TRU-Comfort back are
described in "TRU-Comfort Components" (figure 14). Use
these diagrams to familiarize yourself with the function and
location of each component before using the TRU-Balance 4
Power Positioning System.
NOTE: Refer to the manual that was supplied with your
controller for information on joystick and attendant
control operation. If your TRU-Balance 4 Power
Positioning System is equipped with a different operating
device, refer to the operation manual supplied with that
device and/or your power chair owner's manual.
Precautionary Guide
Before operating the TRU-Balance 4 Power Positioning
System, please read the following. These guidelines are
provided for your benefit and will aid you in the safe operation
of the seating system.
Turn off the power before you are seated in the TRU-
Balance 4 Power Positioning System.
Always have assistance when you are being seated in
the TRU-Balance 4 Power Positioning System.
Follow all of the procedures and heed the warnings
as explained in your power chair owner's manual and
Consumer Safety Guide.

Advertisement

Table of Contents
loading

Table of Contents