Panasonic PRIME+ NR-BW530X Operating Instructions Manual page 35

Troubleshooting
The food
melts.
Not cold, no
freezing.
Stop
working
halfway.
Error display on
control panel.
●Store frozen foods with the Prime Freeze case in a long period
of time, or store high-fat ice cream in the freezer. (The cooling
performance of the Prime Freeze case is rated with two stars.)
(Page 18)
●Do not place cold food next to hot food.
●Freezing capacity may not be sufficient depending on the type
of food, packaging condition, storage capacity, and how often
that the door is opened and closed.
→ Reset Prime Freeze. (Page 18)
●If Prime Freeze is set during defrosting, the time display will
start counting, but the fan will stop and the food will not be
cooled enough. After defrosting, reset Prime Freeze.
●If Quick Ice Making, Quick Cooling, Prime Fresh+ are set
during the operation of Prime Freeze, Prime Freeze will be
stopped.
●U10: Warning if door is open too long.
→ Check that the compartment doors are closed properly.
●H01: FCC sensor is tripped/short circuited.
●H02: PCC sensor is tripped/short circuited.
●H03: PFC sensor is tripped/short circuited.
●H05: DFC sensor is tripped/short circuited.
●H07: ATC sensor is tripped/short circuited.
●H21: Turn off the automatic ice maker.
●H43: The WE fan motor is broken or stuck.
●H29: The FC fan motor is broken or stuck.
●H31: Abnormal defrosting light of the freezer room.
●H41: Protect the refrigerator in case of low voltage.
●H50: Abnormal communication.
●H35: Refrigerant leak (high-pressure leak).
→ Please contact the Service Center for support.
35