Troubleshooting - Panasonic PRIME+ NR-BW530X Operating Instructions Manual

Troubleshooting

Before you call for service, please check the following steps:
The refrigerator
does not operate.
The refrigerator is
not cool enough.
Outside
Inside
The refrigerator
generates noise.
32
●Check that the plug and its socket are in good condition.
●Check if there is any problem on main fuse and electrical
system in the house.
●Check by unplugging and waiting for 7 minutes before plugging
it back in.
●Check to ensure that the LED lamps are displayed at proper
positions on the control panel.
●Check to see if the refrigerator is overloaded with stuff or there
is any hot foodstuff refrigerated inside.
●Is the refrigerator exposed directly to sunlight or heat source?
●Is the refrigerator door completely closed?
●Is the refrigerator door opened frequently?
●When the air humidity is high, there is a chance
that moisture will condense on the refrigerator
surface, around the door gasket or on the door
surface. This situation will stop if the air humidity
decreases. Please wipe it up with dry cloth.
●Is the door closed firmly?
●Is the door being opened and closed too frequently?
●Condensation inside the refrigerator can also be caused by
leaving high-humidity foods uncovered or unwrapped.
●When the humidity is high, the door is open for a long time,
or when the refrigerator contains too much food or makes too
much ice, snow may form inside the freezer room at the location
of the freezer room case, icebox or the Prime Freeze case door.
This is normal. Please wipe with dry and soft cloth.
●Check if the refrigerator is located on a stable floor or is
installed properly.
●Check if there is any object in contact with the refrigerator.
●The cracking sound is caused by the thermal expansion of the
internal components, which is normal.
●After installation, the refrigerator may make loud noise.
The noise will reduce when the refrigerator has been cooled.
●There may be a whistling sound inside the refrigerator when
opening and closing the door. This is caused by the air outside
being drawn in through the pipe on the backside of the
refrigerator to better balance the air circulation inside the unit.