Remote Access With The Ddns Service - Lorex L15LD400 Instruction Manual

Remote Access with the DDNS Service

The L15LD400 Series Observation System can be remotely controlled using your existing network
and the Lorex Client 2.0 software. Recording times may vary - please use the Recording Calcula-
tor provided with the CD to find an aproximate recording time calculation.
1. Connect the Observation System to the Router using the supplied Ethernet Cable. Power the
Observation System on.
NOTE: The Observation System must be connected to the router prior to powering on the
system. This allows the system to communicate on your network
2. Find the IP address of your Observation System through the Menu System on the unit. To locate
your External IP address, visit
3. Enable PORT FORWARDING on your Router. Refer to the CD, Lorex Website or the Router
Manufacturer's websites for further assistance with your specific network setup and hardware.
4. Set up a DDNS web account at
5. Setup the Observation System DDNS (based on information setup on the DDNS website in step
4).
6. Install the Software on your PC. Configure the software to connect using the DDNS.
INTERNET
http://www.showmyip.com
http://www.lorexddns.com/
OBSERVATION SYSTEM
ROUTER
(Not Included)
Remote Access with the DDNS Service
PC
(Not Included)
15