1
5. SEQUENCE - Changes the onscreen view to Sequence Mode (sequence between Cam 1~4)
6. CAMERA SELECTION BUTTONS - Press buttons 1~4 to select a Camera Number for display.
7. CONNECT - Connect to the Observation System (based on the settings configured in the Setup
Menu).
8. DISCONNECT - Disconnects from the Observation System.
9. PLAYBACK - Accesses previously recorded data for playback on the Lorex Client 2.0 Software.
This option is only available when you are remotely connected to the system.
10. SETUP - Enters the Setup Menu for remote connection to the Observation System.
11. EXIT- Closes the Lorex Client 2.0 software.
6
7
8
Lorex Client 2.0 Software - Main Screen
9
10
2
3
4
5
11
7