Settings; Sleep; Alarms (Not In Battery Mode) - Pinell NORTH BASIC User Manual

Settings

All settings parameters for Pinell north basic are available via the menu tree.
•

Sleep

•
Alarm
•
Equaliser
•
Time
•
Backlight
•
Language
•
Factory Reset
•
SW version
Sleep
To set the sleep timer, press MENU > Sleep > rotate SELECT:
Sleep OFF, 15, 30, 45, 60 or 90 minutes.
Press SELECT when the required time is displayed.
To cancel a sleep time, select Sleep Off from the sleep options.
A sleep time is automatically cancelled if Pinell north basic is put into Standby.

Alarms (not in battery mode)

To set or change alarm press MENU > Alarm.
Select Alarm 1 or Alarm 2, then configure the following
parameters:
•
On time: 00:00 (adjust as necessary)
•
Duration: 15, 30, 45, 60, 90 minutes (for DAB/FM)
•
Source: Buzzer, DAB, FM
•
Preset: Last listened or 1-10
•
Enable: Once, Weekends, Weekdays, Daily
•
Date: 01-11-2022 (adjust as necessary)
To set the alarm, press SELECT > select On > SELECT
At the set time, the alarm will sound. To temporarily silence it, press SELECT. Pressing SELECT repeatedly
cycles through the available snooze periods: 5, 10, 15 or 30 minutes.
The radio returns to standby for the set period, with the silenced alarm icon flashing and a countdown of the
remaining snooze period. After the set snooze time the alarm will sound again.
During a snooze period, to change the snooze time, press SELECT to select a new snooze time.
Any remaining snooze time is reset to the selected time period.
To cancel a sounding alarm, or an alarm in snooze, long press MODE.
Pinell north basic
9