Related Manuals for Kett KD-442
Summary of Contents for Kett KD-442
- Page 1 SAFETY RULES MODEL KD-442 ELECTRIC SHEAR The KD-442 has a DOUBLE INSULATED power unit equipped with a 2 wire cord and 2 prong plug...
- Page 2 Have your power tool serviced by a qualifi ed repair person using only identical replacement parts. This will ensure that the safety of the power tool in maintained. b) For KD-442 and all double insulated tools: When servicing, use only identical replacement parts.
- Page 3 SYMBOLS The symbol on the Caution Label is mean to convey this message. Ne pas exposer a la pluie et ne pas utiliser dans les emplacements humides. Don’t use power tools in damp or wet locations. Defi nitions of Symbols Class II Construction (Double insulated motor) = Underwriters Laboratory =...
-
Page 4: Functional Description
FUNCTIONAL DESCRIPTION Please read carefully all safety rules and operating instructions. The Model KD-442 Shear is recommended for CR sheet steel up to 16 gage. Secure work piece. To start cut, place side knives of shear slightly on the edge of the top side of the work piece to steady the tool and ready it for the cut. -
Page 5: Parts List
THE KETT TOOL COMPANY 5055 Madison Road, Cincinnati, Ohio 45227 (513) 271-0333 fax (513) 271-5318 www.kett-tool.com Component Motor Unit Model 253-59 Used on KD-400, KD-480, KD-440, KD-441, KD-442, KD-1493 and KD-1495 Shears KS-421, KS-423, KS-424, KS-426 and KSV-432 Saws PARTS LIST ITEM PART DESCRIPTION REQ’D... - Page 6 (60-22L and 60-22R) into position the nose of the power unit. WARNING: THE KETT TOOL CO. CANNOT ASSUME RESPONSIBLITY FOR DAMAGE TO OR MALFUNCTION OF A KETT SHEAR HEAD USED IN COMBINATION WITH ANY DRILL OTHER THAN THOSE REGULARLY SUPPLIED BY US.
Need help?
Do you have a question about the KD-442 and is the answer not in the manual?
Questions and answers