Related Manuals for Kett KD-440
Summary of Contents for Kett KD-440
- Page 1 SAFETY RULES MODEL KD-440 ELECTRIC SHEAR The KD-440 has a DOUBLE INSULATED power unit equipped with a 2 wire cord and 2 prong plug...
- Page 2 THE KETT TOOL COMPANY 5055 Madison Road, Cincinnati, Ohio 45227 (513) 271-0333 fax (513) 271-5318 www.kett-tool.com Component Motor Unit Model 253-59 Used on KD-440, KD-441, KD-442, KD-493 and KD-495 Shears KS-423, KS-424, KS-426 and KSV-432 Saws PARTS LIST ITEM PART DESCRIPTION REQ’D...
- Page 3 (60-22L and 60-22R) into position the nose of the power unit. WARNING: THE KETT TOOL CO. CANNOT ASSUME RESPONSIBLITY FOR DAMAGE TO OR MALFUNCTION OF A KETT SHEAR HEAD USED IN COMBINATION WITH ANY DRILL OTHER THAN THOSE REGULARLY SUPPLIED BY US.
- Page 4 When using electric tools basic safety precautions should always be followed to reduce the risk of fi re, electric shock, and personal injury, including the following: Read all instructions. Save these instructions. For KD-440 and all double insulated tools: When servicing, use only identical replacement parts. Guard Against Electric Shock Prevent body contact with grounded surfaces, for example: pipes, radiators, ranges, refrigerator enclosures.
- Page 5 FUNCTIONAL DESCRIPTION Please read carefully all safety rules and operating instructions. The Model KD-440 Shear is recommended for CR sheet steel up to 14 gage. Secure work piece. To start cut, place side knives of shear slightly on the edge of the top side of the work piece to steady the tool and ready it for the cut.
Need help?
Do you have a question about the KD-440 and is the answer not in the manual?
Questions and answers