When using electric tools basic safety precautions should always be followed to reduce the risk of fi re, electric shock, and personal injury, including the following: Read all instructions. Save these instructions. For KD-441 and all double insulated tools: When servicing, use only identical replacement parts. SPECIFIC SAFETY RULES Keep Work Area Clean Cluttered areas and benches invite accidents.
FUNCTIONAL DESCRIPTION Please read carefully all safety rules and operating instructions. The Model KD-441 Shear is recommended for CR sheet steel up to 24 gage. Secure work piece. To start cut, place the material being cut in between the blades and ready it for the cut. Depress the trigger switch and guide shear into the work.
THE KETT TOOL COMPANY 5055 Madison Road, Cincinnati, Ohio 45227 (513) 271-0333 fax (513) 271-5318 www.kett-tool.com Component Motor Unit Model 253-59 Used on KD-400, KD-480, KD-440, KD-441, KD-442, KD-1493 and KD-1495 Shears KS-421, KS-423, KS-424, KS-426 and KSV-432 Saws PARTS LIST ITEM PART DESCRIPTION REQ’D...
Page 5
23) place the side knife (41-22) and side side spacer the nose of the power unit. WARNING: THE KETT TOOL CO. CANNOT ASSUME RESPONSIBLITY FOR DAMAGE TO OR MALFUNCTION OF A KETT SHEAR HEAD USED IN COMBINATION WITH ANY DRILL OTHER THAN THOSE REGULARLY SUPPLIED BY US.
This bearing should NEVER be immersed in a solvent or cleaning fl uid. Adherence to these maintenance instructions will greatly increase the life of your Model KD-441 Electric Shear, so it will give you long and satisfactory service.
Need help?
Do you have a question about the KD-441 and is the answer not in the manual?
Questions and answers