Related Manuals for Kett KL-2020
Summary of Contents for Kett KL-2020
- Page 1 SAFETY RULES MODEL KL-2020 ELECTRIC NIBBLER The KL-2020 has a DOUBLE INSULATED power unit equipped with a 2 wire cord and 2 prong plug...
- Page 2 When using electric tools basic safety precautions should always be followed to reduce the risk of fi re, electric shock, and personal injury, including the following: Read all instructions. Save these instructions. For KL-2020 and all double insulated tools: When servicing, use only identical replacement parts. SPECIFIC SAFETY RULES Keep Work Area Clean Cluttered areas and benches invite accidents.
- Page 3 FUNCTIONAL DESCRIPTION Please read carefully all safety rules and operating instructions. The Model KL-2020 Nibbler is recommended for CR sheet steel up to 14 gauge. Secure work piece. To start cut, place die opening onto the edge of the work piece to steady the tool and ready it for the cut. Depress the trigger switch and guide nibbler into the work.
- Page 4 THE KETT TOOL COMPANY 5055 Madison Road, Cincinnati, Ohio 45227 (513) 271-0333 fax (513) 271-5318 www.kett-tool.com Component Motor Unit Model 253-80 Used on KL-200, KL-240, KL-241, KL-242, KL-246L, KL-246R, KL-246L and KL-280 PARTS LIST ITEM PART DESCRIPTION REQ’D ITEM PART DESCRIPTION REQ’D...
- Page 5 253-80 449893 253-68 449893 253-58 154-57 The use of Stick Cutting Wax (264-5) or a cutting oil will greatly improve the performance of the KETT Nibbler. Use stick cutting wax on the underside of the work piece for best results.
- Page 6 It has been permanently lubricated at the factory to last the life of the bearing. This bearing should NEVER be immersed in a solvent or cleaning fl uid. Adherence to these maintenance instructions will greatly increase the life of your Model KL-2020 Electric Nibbler, so it will give you long and satisfactory service.
Need help?
Do you have a question about the KL-2020 and is the answer not in the manual?
Questions and answers