Page 1
MODEL NIBBLER MAXIMUM DUTY 10 GAUGE CAPACITY KETT TOOL COMPANY 5055 Madison Road, Cincinnati, Ohio 45247-1494 513/271-0333 Fax 513/271-5318 www.kett-tool.com e-mail sales@kett-tool.com...
Page 2
SPECIFICATIONS MAXIMUM MATERIAL THICKNESS (CUTTING CAPACITY) MILD STEEL 10 Ga. (.1345 in. / 3,42 mm) STAINLESS STEEL 12 Ga. (.1046 in. / 2,66 mm) NON-FERROUS 8 Ga. (.1644 in. / 4,18 mm) MAXIMUM CUTTING SPEED 90 INCHES PER MINUTE (2.3 meters per minute) MINIMUM CUTTING RADIUS* 6 inches (152,4 mm) PHYSICAL SIZE...
Page 3
When tool is used outdoors, use only extension cords marked “suitable for use with outdoor appliances.” Store indoors when not in use. SERVICING INSTRUCTIONS: All repairs and maintenance of the electrical components, armature, fi eld, switches and cords of either double insulated or grounded tools must be performed by KETT TOOL COMPANY.
Page 4
PARTS LIST Item # Part # Description N3566 Vinyl Grip N3565 Handle Nose Housing N3518 Pan Head Screw W/Washer N3002 Handle, Motor N3003 Handle, Motor Cover N3537 Nose Housing N3057 Body Screw N3534 Yoke N3532 Dowel Pin N3536 Plunger N3533 Punch N3574 Die Holder/Nose Piece...
Page 6
Basic Adjustments Caution: Always unplug the tool before making adjustments and replacing accessories. Replacing Punch 1. Insert screwdriver in slot of armature shaft X and rotate motor to allow punch removal access holes Y to line up. 2. Loosen screws (19) and pull punch retainer (18) out of the die holder (12). 3.
Need help?
Do you have a question about the HN2 and is the answer not in the manual?
Questions and answers