Installation
Spool Gun Specifications
Primary (Input) Volts
Maximum Output Amperage
Rated Output and Duty Cycle
Supplied Drive Roll
Recommended Wire Size
Wire Speed
Recommended Material
Coolant Type
Dimensions
Cable Length
Consumables
Weight
Site Selection
BE SURE TO LOCATE THE SPOOL GUN ACCORDING TO THE FOLLOWING GUIDELINES:
•
In areas free from moisture and dust;
•
In areas with ambient temperature between 30° to 90°F;
•
In areas free from oil, steam and corrosive gases;
•
In areas not subjected to abnormal vibration or shock;
•
In areas not exposed to direct sunlight or rain;
•
Place at a distance of 12" or more from walls or similar obstructions that could restrict natural air flow for cooling.
Ventilation
Since the inhalation of welding fumes can be harmful, ensure that the welding area is effectively ventilated. See the
"Safety Summary" for more details (pages 5-9).
Additional Warnings
FOR YOUR SAFETY, BEFORE CONNECTING THE POWER SOURCE TO THE LINE CLOSELY
FOLLOW THESE INSTRUCTIONS:
•
An adequate two-pole breaker must be inserted before the main outlet. This breaker must be equipped with
time-delay fuses.
•
When working in a confined space, the welder must be kept outside the welding area and the ground cable
should be fixed to the workpiece. Never work in a damp or wet confined space.
•
Do not use damaged INPUT POWER CABLE or welding cables.
•
The welding gun/torch/electrode should never be pointed at the operator or other people.
•
The welder must never be operated without its panels attached. This could cause serious injury to the operator
and could damage the equipment.
10
0-12 VDC
300A (DC output only)
220A @ 60%
0.035" and 0.047" Grooves
0.035" (Compatible with 0.030 - 0.047")
1000 IPM Max
Aluminum and Stainless Steel Alloys
Air
18" (462mm) X 9.3" (236mm) X 2.7" (70mm)
25' (7m)
TWECO Style Series 14H
8 lbs (Including Power Cable)
WWW.FORNEYIND.COM