Brake Disc Cleaning - Hyundai KONA Electric 2023 Owner's Manual

Press brake pedal to deactivate AUTO
HOLD
If you did not apply the brake pedal when
you release the Auto Hold by pressing
the [AUTO HOLD] switch, a warning will
sound and a message will appear.
AUTO HOLD conditions not met.
Close door, hood and liftgate
When you press the [AUTO HOLD]
switch, if the driver's door and hood are
not closed, a warning will sound and a
message will appear on the cluster LCD
display.
Press the [AUTO HOLD] switch after
closing the driver's door and hood and
liftgate.
Brake Disc Cleaning (If
equipped)
Use the Brake Disc Cleaning function if
noise is generated when depressing the
brake while driving or if the brake disc
gets rusty. It helps reduce the noise and
rust. Regenerative braking is restrained
while Brake Disc Cleaning is operated,
which may lower the electric energy
efficiency.
OIK057080L
Press and hold the AUTO HOLD button
for over 3 seconds.
Brake Disc Cleaning starts operating
when the message 'Brake disc
cleaning' is displayed on the
instrument cluster.
Regenerative braking is restrained
while the brake is depressed
approximately 10 times while driving
(it may differ depending on driving
conditions). It helps reduce the noise
and rust.
Brake Disc Cleaning function will turn
off automatically when the operation
is completed. It can also be turned
off before operation is completed by
turning off the vehicle or pressing
the AUTO HOLD button for over 3
seconds.
OOSEV058076L
06
6-33