High Beam Assist (Hba); High Beam Assist Setting - Hyundai KONA Electric 2023 Owner's Manual

Convenient Features
High Beam Assist will automatically
adjust the headlight range (switches
between high beam and low beam)
depending on the brightness of detected
vehicles and certain road conditions.
Detecting sensor (Front view
camera)
[1] : Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in chapter 7.
5-72

High Beam Assist Setting

The driver can activate HBA by placing
the START/STOP button to the ON
position and by selecting: 'User Settings
disable this setting, HBA will not work.
The setting of HBA will be maintained, as
selected, when the vehicle is re-started.
OPDE046057
For your safety, change the Settings
after parking the vehicle at a safe
location.
High Beam Assist operation
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing the
lever away from you.
3. High Beam Assist (
illuminate.
4. High Beam Assist will turn on when
vehicle speed is above 25 mph (40
km/h).
1) If the light switch is pushed away
OOSEV051025L
2) If the light switch is pulled towards
3) If the light switch is pulled towards
4) If the light switch is placed to the
WARNING
) indicator will
when High Beam Assist is operating,
High Beam Assist will turn off
and the high beam will be on
continuously.
you when the high beam is off, the
high beam will turn on without High
Beam Assist canceled. When you let
go of the light switch, the lever will
move to the middle and the high
beam will turn off.
you when the high beam is on by
High Beam Assist, the low beam
will be on and High Beam Assist will
turn off.
headlight position, High Beam
Assist will turn off and the low
beam will be on continuously.