Black Max BMi2122 Operator's Manual page 12

Digital inverter generator
Hide thumbs Also See for BMi2122:
Table of Contents

Advertisement

Available languages

Available languages

SYMBOLS
ENGINE LUBRICANT WARNING
You must add lubricant before first operating the generator. Always check the lubricant
level before each operation. The lubricant level should always register between the hatched
areas on the dipstick. The unit is equipped with a sensor which will automatically shut
off the engine if the lubricant level falls below a safe limit.
FUEL CAP WARNING
Never remove fuel cap when unit is running. Shut off engine and allow the unit to cool at least five minutes. Remove cap
slowly to release any pressure built up in the fuel system and to avoid the heat from the muffler igniting fuel vapors.
GROUNDING WARNING
This generator does not include
a ground rod or copper wire.
Call a qualified electrician for
local grounding requirements.
STORAGE NOTICE
Always store the generator standing on its feet. Never store the unit on its side or in a
vertical position.
CLEARANCE WARNING
While operating and storing, keep at least 3 feet of clearance on all sides of this product,
including overhead. Allow a minimum of 30 minutes of "cool down" time before storage.
Heat created by muffler and exhaust gases could be hot enough to cause serious burns
and/or ignite combustible objects.
SPARK ARRESTOR
Operation of this equipment may create sparks that can start fires around dry vegetation.
A spark arrestor may be required. The operator should contact local fire agencies for laws
or regulations relating to fire prevention requirements.
HOT SURFACE WARNING
Do not touch the muffler or aluminum cylinder of the engine. They are very HOT and will cause severe burns. Don't put
body parts or any flammable or combustible materials in the direct path of the exhaust.
Page 8 — English

Advertisement

Table of Contents
loading

Table of Contents