Page 2
Getting to know your Synexis Sphere ® Inside Front Cover Back Cover Filter UV-A bulb cover MERV 11 filter Carbon filter Sail Inside Front Cover T10 screws Fan speed or thumb control switch screws Green power-on On/Off Power cord switch UV-A bulb (packed Included tools &...
Page 3
READ FULL INSTRUCTIONS AND SAFETY/WARNING INFORMATION PRIOR TO USING THIS DEVICE. Do not mount Sphere device to the ceiling. See the owner’s manual for full installation instructions. The Synexis Sphere comes with the tabletop stand pre-installed.
Page 4
FIND CONSUMABLES SAIL INSTALLATION Remove Sail, carbon filter, and Place Sphere device on a stable, MERV 11 filter from Starter Kit box flat surface, then remove the and UV-A bulb from Sphere box. screws at the top and bottom. (Extra Sail and MERV 11 filter are...
Page 5
Align the 4 pins in bulb base to the Firmly insert the power cord into holes in the socket (wide to wide, back of Sphere. Plug cord into narrow to narrow) and insert, slightly power outlet. Turn on, adjust fan tilting the bulb base down.
Page 6
11711 W 79th Street (844) 352-7680 Lenexa, KS 66214 info@synexis.com United States of America synexis.ca SYN-GEN-QSG-062822-001-3981-FRCA_EN...
Need help?
Do you have a question about the Sphere and is the answer not in the manual?
Questions and answers