General Safety Instructions ® information contained herein. This Sphere manual is provided “as is” and without any representation, Device Placement term, condition or warranty of any kind, either express or implied. To the extent permitted by law,...
Familiarize yourself with the installation steps and required tools ✔ The Sphere can be mounted virtually anywhere and requires only a standard 120 VAC outlet. Inspect your system and parts Please contact your Account Representative for questions or additional information.
General Safety Instructions Device Placement The Sphere is an electrical device. Please read the safety instructions and considerations before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The Limited Warranty • Select a location where the air intake and top grille are not obstructed.
Installation Installation (cont.) The Sphere device includes filters (carbon & MERV 11), fan, and one non-germicidal UV-A bulb. Inserting the Sail: Replacing the Sail: Getting to know your device: The power cord and power switch are To adjust the device airflow, use...
‘as-needed basis’. opening cover. Do not try to repair or adjust any of the electrical components in your Sphere device. Contact Synexis for assistance. WARNING: UV-A bulbs contain a small amount of mercury similar to any fluorescent bulb. Check with your local waste management authority for disposal or recycling requirements.
• Do not block any air vents during use. The Sphere is designed to operate 24 hours a day, 7 days a week. DHP is meant to be a continuous • Do not place the DHP system near a heat source.
Page 8
Synexis LLC 11711 W 79th St | Lenexa, KS | 66214 +1 (844) 352-7680 info@synexis.com SYN-GEN-1020-002(1)
Need help?
Do you have a question about the Sphere and is the answer not in the manual?
Questions and answers