4-2. Inverter compressor
Check point 1. Check the terminal connection.
•
Check the following terminal connections of the compressor. (Loosening or incorrect wiring.)
–
R (U): Red
–
S (V): →hite
–
C (W): Black
•
Check the following terminal connections of the Main PCB. (Loosening or incorrect wiring.)
–
W400 (U): Red
–
W401 (V): →hite
–
W402 (W): Black
Check point 2. Check the winding resistance.
Check the winding resistance of each terminal.
Resistance value:
•
18 model: 1.910 Ω at 20 °C
•
24 model: 1.916 Ω ±8 % at 20 °C
C(W)
If the resistance value is 0 Ω or infinite, replace the compressor.
4-2. Inverter compressor
S (V)
Main PCB
R (U)
Main PCB
(U)
(V)
Red
Compressor
RED
R(U)
WHITE
S(V)
BLACK
- (03-49) -
C (W)
(W)
Black
White
4. Service parts information