ABB DCS880 Manual page 7

which is required by qualified personnel for normal operation of the machines and
devices in industrial installations.
If in special cases the electrical machines and devices are intended for use in non-
industrial installations - which may require stricter safety regulations (e.g. protection
against contact by children or similar) - these additional safety measures for the
installation must be provided by the customer during assembly.
Note:
−
When the control location is not set to Local (Local not shown in the status row of the
display), the stop key on the control panel will not stop the drive/unit. To stop the
drive/unit using the control panel, press the Loc/Rem key and then the stop key
3ADW000803R0101 DCS880 H4T (Tosa) manual en a
7
.
Safety instructions