ABB DCS880 Manual page 10

Hide thumbs Also See for DCS880:
Table of Contents

Advertisement

10
Term/Abbreviation
Definition
FENA-21
Optional dual-port Ethernet/IP, Modbus/TCP and PROFINET IO adapter.
FEPL-02
Optional POWERLINK adapter.
FIO-01
Optional digital I/O extension module.
FIO-11
Optional analog I/O extension module.
FPBA-01
Optional PROFIBUS DP adapter.
FPTC-01
Optional thermistor protection module.
FPTC-02
Optional ATEX-certified thermistor protection module for potentially explosive
atmospheres.
FSCA-01
Optional Modbus/RTU adapter.
FSO-21
Optional safety functions module.
FSPS-21
Optional PROFIsafe safety functions module.
HTL
High-threshold logic.
I/O
Input/Output.
ModuleBus
A communication link used by, for example, ABB controllers. DCS880 drives/units
can be connected to the optical ModuleBus link of the controller.
Network control
With fieldbus protocols based on the Common Industrial Protocol (CIP
DeviceNet and Ethernet/IP, denotes the control of the drive/unit using the Net
Ctrl and Net Ref objects of the ODVA AC/DC Drive Profile. For more information,
see www.odva.org, and the following manuals:
Off3 (emergency
Function in Drive:
stop)
Off3 (emergency stop) with configurable deceleration time according to cat. 1.
OPL
Optical power link. Protocol used in communication between the control unit and
the power unit.
Parameter
User-adjustable operation instruction to the drive/unit.
PID controller
Proportional-integral-derivative controller. The speed control is based on a PID
algorithm.
PLC
Programmable logic controller.
Power unit
Contains the power electronics and power connections of the drive/unit. The
control unit is connected to the power unit.
PTC
Positive temperature coefficient.
PU
See power unit.
RFG
Ramp function generator.
RO
Relay output; interface for a digital output signal. Implemented with a relay.
Signal
Value measured or calculated by the drive/unit. It can also contain status
information. Most signals are read-only, but some (especially counter-type
signals) can be reset.
SS1
Safe stop 1.
SSI
Synchronous serial interface.
STO
Safe torque off.
TTL
Transistor-transistor logic.
UPS
Uninterruptible power supply: Power supply equipment with battery to maintain
output voltage during power failure.
Introduction to this manual
FDNA-01 DeviceNet adapter module User's manual
FENA-11/-21 Ethernet adapter module User's manual
3ADW000803R0101 DCS880 H4T (Tosa) manual en a
TM
), such as
(3AFE68573360).
(3AUA0000093568).

Advertisement

Table of Contents
loading

Table of Contents