Table of Contents
Advertisement
[Power]
[Standby Mode When No Signal]
Set whether or not to enable the feature for forcing shutdown after ten seconds.
•
The feature is set to [On] or [Off].
•
When set to [On], the product turns off if there is no signal for ten seconds.
•
When set to [Off], the feature for forcing shutdown after ten seconds is disabled.
•
It is recommended that the feature be set to [Off] when the product is to be used for a long time since it is a power-
off function.
[No IR Power Off (4hour)]
Set whether or not to enable the feature for forcing shutdown after four hours.
•
The feature is set to [On] or [Off].
•
When set to [On], the product turns off when there is no input from the remote control for four hours.
•
When set to [Off], the feature for forcing shutdown after four hours is disabled.
•
It is recommended that the feature be set to [Off] when the product is to be used for a long time because it is a
power-off function.
[Network Settings]
Connect to the Local Area Network (LAN) through the LAN port, and set up the network. Once a physical connection is
established, the device automatically connects to most networks without any adjustment. In some networks, the device
settings may need to be adjusted. For more information, contact your Internet service provider or refer to the router's
manual.
NOTE
• If connected to a network that supports IPv6, it is also possible to view IPv6 network connection information from
a wired network connection. However, IPv6 connections only support automatic connections.
[LG Connect]
•
Sets the [LG Connect] function to On or Off.
•
You can connect device via Promota, Calman API and WebApp API.
•
Default setting is 'Off' .
[Caption]
This feature is used to show closed captions on the screen.
•
Closed Caption (Toggle On / Off): Enable closed captions.
•
Closed Caption Mode: 708 / 608 Transcoded / 608 ANC captions are available for selection.
•
608 Caption Channel: CC1
•
708 Caption Service: off/Service1
59
Advertisement
Table of Contents
