Table of Contents
Advertisement
48
- [Input Dual Link (SDI 1&2)]: Switches input to Dual Link (SDI1 & 2).
- [Input Dual Link (SDI 3&4)]: Switches input to Dual Link (SDI3 & 4).
- [Input Quad Link : Auto]: Switches input to Quad Link: Auto.
- [Input Quad Link : 2SI]: Switches input to Quad Link: 2SI.
- [Input Quad Link : Square]: Switches input to Quad Link: Square.
- [Input SDI Quad View]: Switches input to SDI Quad View.
- [Input SFP+]: Switches input to SFP+.
- [Over Scan]: Change the Scan settings.
- [Aspect Ratio]: Change the Screen Size settings.
- [Menu Key]: Set the Menu key.
- [Enter Key]: Set the OK key.
- [Up Key]: Set the Up key.
- [Down Key]: Set the Down key.
- [Function Key 1]: Set Function key 1.
- [Function Key 2]: Set Function key 2.
- [Function Key 3]: Set Function key 3.
- [Function Key 4]: Set Function key 4.
- [Function Key 5]: Set Function key 5.
- [Waveform]: Change the waveform options.
•
GPI 7 is always set as [Power Key].
- [Power Key]: Turns power on or off.
NOTE
• Changing High to Low for a GPI executes the feature assigned to the GPI.
• GPIs cannot be used to execute a disabled feature, even if it is assigned to the GPI.
• When using [Zoom], the actions of the features assigned to GPIs are as follows:
Action
No action.
Power On / Off
Turns off Zoom and executes the
feature.
Feature is executed
while Zoom is turned off.
Undefined
Power Key
Input HDMI1, Input HDMI2, Input SDI1, Input SDI2, Input SDI3, Input SDI4,
Input Dual Link (SDI1 & 2), Input Quad Link: Auto, Input Quad Link: 2SI, Input
Quad Link: Square, Input SDI Quad View, Input SFP+, Over Scan, Screen Size,
Function key 1, Function key 2, Function key3, Function key 4, Function key
5, Waveform
Marker Preset 1, Marker Preset 2, Marker, Centre Marker, Safety Zone, Tally
R, Tally G, Menu key, OK key, Up key, Down key
Feature
Advertisement
Table of Contents
