Table of Contents
Advertisement
10
en | Amplifier controls
ZXA5 Series Loudspeaker
Control
Function
OUTPUT signal connector
Output is full bandwidth pass through.
Crossover mode switch
Selects between 40 Hz highpass filter for
Fullrange use, and 100 Hz highpass filter for
use with a subwoofer. It is not recommended
that you use a ZxA5 in Fullrange mode with
subwoofers.
LEVEL
This control sets the output level of the ZxA5
in a range between -∞ dB and +6 dB. The
internal power amplifier provides a nominal
input sensitivity of +6 dBu.
POWER switch
AC switch for switching the ZxA5's power ON
or OFF. The switch lights after turning the
power ON. If the switch is not lit upon
turning the power on, make sure that the AC
cord is correctly connected. If the AC cord is
correctly connected and the AC switch does
not light upon power-on, please contact your
local dealer.
MAINS IN
AC connection is established via a PowerCon
connector. A 15' (5m) long AC cord with
PowerCon plug is supplied.
MAINS OUT
The PowerCon AC out socket allows the
connection of additional ZxA5 systems. To
prevent AC network overload, connecting
more than (3) ZxA5 systems to a single AC
outlet (10 A - 16 A) is not recommended.
2022-06 | 07 | F.01U.177.795
Electro-Voice
User manual
Advertisement
Table of Contents
