Advertisement
Cleaning
Before cleaning the heater, disconnect it by pulling out the
plug from the wall socket. Do not use detergents, abrasive
cleaning powder or polish of any kind on the body of the heater.
Allow the heater to cool, then wipe with a dry cloth to remove
dust and a damp cloth (not wet) to clean off stains. Be careful
not to allow moisture into the heater.
To clean the reflector, see 'Maintenance'.
Restraint.
On the rear of the heater there are two retraining brackets 'A',
as shown in Fig 6 below. To use these brackets loosen the
mounting screws partially and rotate the brackets outwards
90 degrees, as in Fig. 7 then retighthen the screws.
Place the heater in the location where it is intended to be used
and with a pencil mark the location of the holes on the wall.
Lift the heater safely to one side and carefully drill and plug
the wall using a suitable fixing plug for the type of wall. Place
the heater back in position and screw the heater in position.
Recycling
At the end of the electrical products useful life it
should not be disposed of with household waste.
Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice
in your country.
After Sales Service
Your product is guaranteed for one year from the date of
purchase.
Within this period, we undertake to repair or exchange this
product free of charge (excluding lamps & subject to availability)
provided it has been installed and operated in accordance with
these instructions.
Your rights under this guarantee are additional to your statutory
rights, which in turn are not affected by this guarantee.
Should you require after sales information or assistance with
this product please go to www.dimplex.co.uk where you will
find our self help guide by clicking on "After Sales" or ring our
helpdesk on 0344 879 3588 (UK) or 01 842 8222 (R.O.I.).
Fig. 6
Please retain your receipt as proof of purchase.
Fig. 7
Advertisement
