Advertisement
Quick Links
Product Installation Guidelines
CP-BS Wall/Pillar/Bib/Basin SBA
PRODUCT CODES:
- 32728 (BS Capstan SBA)
- 48751 (BS Stirling SBA)
- 50015 (Vandal Resistant CP-BS SBA)
- 35793 (Ezy-Twist CP-BS SBA)
SPECIFICATIONS
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
IMPORTANT: All taps are tested in accordance with AS/NZS 3718 and leave our premises in good working
order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
−
Spanner and hex key
−
Thread tape
© Galvin Engineering Pty Ltd
G 5/8" BSP
N/A
32728
Ceramic Disc
48751, 50015
Jumper Valve
35793
Cam Action
Min
50
Max
500
Min
5
Max
80
N/A
Brass
Document No.: 001.00.30.14
Version 1, 4 October 2022, Page 1 of 4
Advertisement
Related Manuals for Galvin Engineering BS Capstan SBA
Summary of Contents for Galvin Engineering BS Capstan SBA
- Page 1 Cam Action Working Pressure Range (kPa) Working Temperature (°C) Nominal Flow Rate (LPM) Finish Brass NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Spanner and hex key − Thread tape © Galvin Engineering Pty Ltd...
- Page 2 Refit new head part into tap body. step 1. When installation is complete, slowly open water Note: do not tighten cartridge using the handle supply and inspect for leaks. as this will result in damage to the cartridge © Galvin Engineering Pty Ltd...
- Page 3 SBA if damaged. Spindle is difficult to turn Ceramic discs are worn or damaged Remove and inspect SBA. Remove debris and/or replace SBA if damaged. Handle is loose Screw has come loose Tighten handle screw © Galvin Engineering Pty Ltd...
- Page 4 Version 1, 29 August 2022, Page 4 of 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.